Vibroacoustic Solutions

Advanced Vibroacoustic Technology Therapeutic Transducer System: Our system is built on powerful 70-Watt RMS (100-Watt Max), 4-Ohm main transducers, delivering deep, resonant therapeutic vibrations purely in the 20Hz-80Hz range. The Deluxe and Premium bundles add 15-Watt satellite transducers. While their primary therapeutic vibration range is also 20Hz-80Hz, they are connected to the amplifier's full-range stereo output. This unique configuration allows them to not only transmit vibrations but also to reproduce higher, audible frequencies, creating a subtle, immersive sound sensation that can be heard coming directly from the table itself. High-Fidelity Custom Amplifier: The heart of the system is a professional-grade 200-Watt RMS Bluetooth-enabled amplifier with specialized outputs: Subwoofer/Main Transducer Output: Delivers a powerful 100 Watts to the main transducers. This output precisely delivers the critical 20Hz-200Hz low-frequency vibrations for a purely tactile (felt, not heard) therapeutic effect. Stereo/Small Transducer Output: Provides a full-range 20Hz-20,000Hz signal, allowing the smaller transducers to create both tactile vibrations and an audible, high-fidelity sound. Power & Safety Note: The main transducers are rated for 70 Watts RMS and 100 Watts maximum. While the amplifier can drive them to their 100-Watt peak, it is not recommended to operate at full volume for prolonged periods. Powerful therapeutic effects and strong, deep vibrations are achieved well below the maximum setting, ensuring both client comfort and long-term equipment durability. Immersive Sound Integration: This is a dual-sensory experience. The system transmits therapeutic vibrations directly into the client's body while simultaneously playing the audible, high-fidelity music through headphones and/or room speakers in the Premium bundle, creating a deeply immersive and meditative healing environment. 🔧 Professional Installation & Universal Compatibility Universal Fit: Designed with versatility in mind, the attachment system is fully compatible with most standard massage tables, accommodating widths from 28" to 32". Effortless Installation: Get set up in minutes. Our tool-free attachment system uses a high-strength, long-lasting permanent tape adhesive, ensuring a secure and vibration-free bond to the table's frame. Durable Construction: Built for the demands of a busy practice, all components are made from commercial-grade materials designed for daily professional use. 📱 Smart Connectivity & Precision Control Bluetooth 5.0 Technology: Enjoy a stable, seamless wireless connection to your smartphones, tablets, and other audio devices. Stream therapeutic frequency tracks, guided meditations, or calming music with ease. Multi-Device Compatibility: Fully compatible with iOS, Android, and Windows operating systems. Adjustable Intensity: You are in complete control. The amplifier allows for fine-tuned adjustment of vibration levels, from a gentle, calming sensation to a powerful, deep-tissue therapeutic stimulation, tailored to each client's needs. Options Choose Your Perfect Bundle We offer three curated packages to suit your professional needs and budget. 1. Standard Bundle: The Professional Foundation - 100 Watt Max Ideal for practitioners new to vibroacoustic therapy or those looking to integrate a powerful, foundational sound healing tool into their practice. What's Included: (2x) Main Vibroacoustic Attachment Units: Each housing a 35-Watt RMS transducer (20-80Hz). Total maximum power 100 Watt Custom Bluetooth Amplifier: With specialized outputs and an integrated 3.5mm auxiliary headphone output (transducers active while headphones in use). Professional Over-Ear Headphones: For client's audio immersion. Complete Cable Kit: Includes a 3.5mm auxiliary cable, amplifier power cable, and all necessary transducer connection cables. Comfort Eye Mask Comprehensive User Manual 2. Deluxe Bundle: Full-Body Immersion -200 Watt Max Designed for the practitioner who wants to offer a more comprehensive and enveloping therapeutic experience. The addition of four satellite transducers ensures vibrations are distributed across the entire body. Includes everything in the Standard Bundle, PLUS: (4x) Small Satellite Transducer Units: Each with a 15-Watt RMS transducer. These units provide precise vibration distribution and may also produce subtle audible sound from the full-range signal, enhancing the immersive experience. Portable High-Fidelity Headphone Amplifier: A dedicated single-output amplifier that provides a cleaner, more powerful, and isolated audio signal to the headphones. This ensures your client hears every nuance of the audio track with enhanced clarity and richness. 3. Premium Bundle: The Ultimate Sensory Experience - 200 Watt Max Amplifier + 10 Watt Speakers The definitive choice for top-tier wellness centers, spas, and dedicated sound therapists. This bundle provides uncompromised audio fidelity for both the client and the room, creating a complete multi-sensory environment. Includes everything in the Deluxe Bundle, with these KEY UPGRADES: Professional Powered Headphone Amplifier: This studio-grade, mains-powered headphone amplifier replaces the portable unit. It features superior internal circuitry for ultra-low distortion, a wider dynamic range, and up to 8 aux outputs for the most pristine audio reproduction. Edifier R33BT Active Bluetooth Bookshelf Speakers: To complete the ambient experience, this bundle includes a set of high-quality room speakers. The Edifier R33BT speakers feature a classic wooden enclosure to minimize acoustic resonance, delivering rich and detailed sound from their 0.5" tweeters and 3.5" mid-bass drivers. Seamless Integration: The Professional Headphone Amplifier not only provides an exceptional client headphone experience but also powers the Edifier speakers, allowing you to fill the therapy room with calming, high-fidelity audio. Specs Technical Specifications Electrical Requirements: Power Supply: Universal AC adapter (110-240V, 50-60Hz) Power Consumption: Maximum 150W during operation Physical Dimensions: Main 70-Watt Attachment Unit: 8" L x 8" W x 3" H Mini 15-Watt Attachment Unit: 4" L x 4" W x 1.4" H Amplifier: 5" L x 5" W x 1.5" H Total Weight: Standard Bundle: Approx. 8 lbs (4 kg) Deluxe & Premium Bundles: Approx. 15 lbs (7 kg) Shipping Weight: Approx. 10-17 lbs with packaging Benefits Therapeutic Benefits & Professional Applications For Clients: Experience deep relaxation, enhanced circulation, natural pain management, improved sleep quality, reduced anxiety, and accelerated muscle recovery. For Practitioners: Enhance your revenue with a premium service, increase client retention and referrals, gain a competitive advantage, and expand your therapeutic offerings with minimal additional training. Ideal For: Massage Therapists, Physical Therapists, Wellness Centers, Spas, Chiropractors, Holistic Health Practitioners, and Rehabilitation Centers. Enhances Modalities: Swedish & Deep Tissue Massage, Sports Recovery, Stress Reduction, Pain Management, Meditation, and Sleep Therapy. Setup A comprehensive guide is included. The simple 5-step process (Prepare, Mount, Connect, Power, Test & Calibrate) will have your system running in under 30 minutes. Please follow all instructions for proper and safe setup. Customer Support & Warranty Warranty Coverage: 1-year manufacturer warranty on all electronic components and a 1-year warranty on all mechanical components. Technical Support: Our dedicated customer service team is available via chat and email to assist you. Training Resources: Access online video tutorials and detailed setup assistance. Modular & Upgradable: A System That Grows With You Our Professional Vibroacoustic Therapy system is designed to be fully modular, allowing you to expand your capabilities as your practice grows. Easy Upgrade Path: Start today with our powerful Standard Bundle and purchase upgrade kits at any time. You can add small transducers to get to the Deluxe level or add the full audio package for the Premium experience. Flexible Investment: This convenient upgrade path allows you to spread out your investment and add new components as funds become available. While purchasing the Premium Bundle upfront offers the greatest overall savings, our modular design ensures you have the flexibility to build your ultimate therapeutic system at your own pace. Expansion Capabilities: The included amplifier supports up to two main transducers and eight small transducers. For the ultimate setup, the system can be expanded with an additional amplifier to power up to four main transducers and eight small transducers simultaneously. Multi-Table Portability (Experimental): For practitioners with multiple massage tables, we are currently testing an optional slider add-on. This system allows a single set of transducer attachments to be portable and interchangeable between two or more tables. This option is experimental and available for purchase by request only at this time. Custom Bundles: Have a specific need or setup in mind? Custom bundles are available by request. Contact our team to design the perfect vibroacoustic system for your practice. Disclaimer: The actual colors of attachment units may vary. The headphones pictured are for demonstration purposes only; actual model provided may vary based on availability but will meet professional quality standards. Installation Guide Installation Guide for Vibroacoustic Massage Table Attachments This guide provides step-by-step instructions to install the Vibroacoustic Therapy Massage Table Attachments with custom amplifier bundle on any standard massage or folding table. Following these procedures ensures optimal attachment performance, safe operation, and long-lasting adhesion using 3M VHB™ tape. 1. Prepare the Table Surface 1.1 Clean the Underside Before installing attachments, flip the table and thoroughly clean the underside where the vibroacoustic boxes will be mounted. Use a non-perfumed cloth and an isopropyl alcohol solution (70% IPA, 30% water) to remove dust, oils, and residues if present. This initial cleaning prevents contaminants from weakening the adhesive bond. 1.2 Remove Staples and Fasteners Inspect the wood surface for any staples, tacks, or protruding fasteners. Remove all staples and metal objects to create a smooth substrate. Embedded staples can puncture the VHB™ tape liner and compromise adhesion. 1.3 Sand and Reclean (for Used Tables) If the table is not brand new, lightly sand the wood surface with fine-grit sandpaper to remove old finish layers and create a uniform surface profile. After sanding, repeat the cleaning process with IPA/water until the wood is free of dust and grease. 2. Position the Vibroacoustic Attachments 2.1 Cables and Connections Locate the cables protruding from each vibroacoustic attachment box. Lay out the attachments on the floor to identify correct cable lengths and connector types. Ensure all cables are intact and free of damage before proceeding. 2.2 Placement on Stationary Tables Place the attachments on the underside of the stationary massage table so that the transducer faces upward toward the client. Position boxes symmetrically along the table length, typically near the headrest and lumbar regions to maximize vibrational coverage. 2.3 Placement on Folding Tables If using a folding table, align the attachments so that when the table is closed, the boxes nestle side by side without interference from hinges. Verify that the table can fully close with cables routed neatly through any folding seams, avoiding pinch points.   3. Secure Attachments with 3M VHB™ Tape 3.1 Tape Preparation Important: Leave the protective liner intact until final positioning is confirmed. 3.2 Final Position Check With the tape-lined attachments held loosely in place, lower the table (or close the folding table) to verify clearance and alignment. Ensure no cables obstruct the closure mechanism and attachments sit flush against the wood surface.   3.3 Apply Permanent Adhesive Once satisfied with placement, peel away the protective film from the VHB™ tape liner and press each attachment firmly onto the table surface. Apply uniform pressure to fully engage the tape adhesive. 3.4 Cure Time Allow the VHB™ tape to set undisturbed for 24 hours at room temperature to achieve a strong initial bond. Full bond strength develops over 72 hours; however, a 24-hour cure provides sufficient adhesion for normal use after installation. 4. Connect to Amplifier and Test Cable Connection: Plug each attachment's cable into the corresponding output on the custom amplifier unit. Power On: Turn on the amplifier and set the intensity to the lowest setting. Functional Check: Play a test track to verify vibration output from each attachment. Adjust Settings: Gradually increase intensity to desired levels, ensuring even and balanced vibration across all attachments. 5. Maintenance and Safety Notes Safety Considerations: Periodically inspect the tape edges for signs of lifting or dust accumulation, and clean gently with a dry cloth. Do not exceed recommended vibration intensity levels to avoid injury or equipment malfunction. If relocation or removal is required, use an oscillating cutting tool with isopropyl alcohol lubrication to carefully separate the tape bond without damaging the table surface. Following these steps ensures secure installation of the Vibroacoustic Therapy Massage Table Attachments, optimal vibrational performance, and reliable adhesion over time.

How It Works Connect your phone or audio device to the amplifier via Bluetooth. Play your favorite music, healing frequencies, or guided meditations—vibrations travel through the table, immersing the user in a deeply relaxing, multisensory experience. No special app or subscription required. *Hand-assembled and tested. Please allow a 7-day handling time for this custom product before it ships via Free Standard Shipping. Benefits ·         Deep relaxation and stress relief ·         Enhanced circulation and muscle recovery ·         Suitable for therapists, spas, clinics, and home users Key Features ·         Integrated Vibroacoustic Therapy o    Custom system with 2 x 50W RMS and 6 x 15W RMS transducers, precisely positioned for optimal whole-body effect. ·         Premium Construction o    Heavy-duty wood frame supports up to 750 lbs; 2.75" thick memory foam cushioning (1.95" sponge + 0.8" memory foam) and soft, durable PU leather upholstery. ·         Fully Portable & Adjustable o    Foldable design for easy transport and storage; 8 height adjustments (24.7"–33.4") for professional versatility. ·         Bluetooth Audio Amplifier o    Connect any phone or device via Bluetooth; use any music or frequency app-no proprietary software required. ·         Complete Accessory Kit o    Includes all necessary cables, 2.1 passive amplifier, free eye mask, and wired/wireless headsets. ·         Effortless Setup o    No assembly required-just connect the cables to the amplifier, your device to the amplifier and you’re ready to go. Technical Specifications Feature Details Table Dimensions 73.2" (L) x 28.3" (W) x 25.2–35.2" (H) Height Adjustments 24.7"–33.4" Weight Capacity 750 lbs Frame Material Heavy-duty wood Cushioning 2.75" memory foam (1.95" sponge + 0.8" memory) Upholstery PU Leather Color Black Table Type Portable, foldable Transducers 2 x 50W RMS + 6 x 15W RMS Amplifier Frequency Range 20Hz–200Hz SUB output, 20Hz -20,000Hz Stereo output Power Passive amplifier (AC power required) App Requirement None Warranty 1 year (vibroacoustic components)   What’s Included ·         Professional portable massage table with pre-installed vibroacoustic system ·         Bluetooth 2.1 passive amplifier ·         All required cables and adapters ·         Free eye mask ·         Wired / wireless headsets ·         1-year warranty on vibroacoustic components ·         Free email technical support

What is Vibroacoustic Therapy? Vibroacoustic therapy utilizes low-frequency sound waves to create gentle vibrations that are felt throughout your body. As these soothing vibrations synchronize with calming audio, you'll experience a deeply immersive sensory experience that promotes relaxation, reduces stress, and may help manage discomfort The Complete Vibroacoustic Experience Our premium bundle includes everything you need to begin your sound healing journey immediately: Meditation Cushion with Quad-Transducer Technology: Feel the difference with four strategically placed tactile transducers that deliver powerful yet gentle vibrations throughout your body. Custom 2.1 Amplifier: Our specially designed amplifier optimizes the vibroacoustic experience, allowing precise control over vibration intensity. Comfortable Headphones: Immerse yourself in crystal-clear audio while simultaneously feeling the vibrations through your body. Premium Eye Mask: Enhance your sensory journey by eliminating visual distractions. Specs Superior Engineering & Design The thoughtfully designed 20" x 20" x 5" cushion features advanced engineering for maximum therapeutic benefit: Powerful Performance: Each tactile transducer delivers 15 watts RMS (30 watts max), for a combined output of 60 watts RMS (120 watts max) with peak force of 30 lbs. per ft. Memory Foam Construction: Specially selected materials optimize vibration transmission while ensuring maximum comfort during extended sessions. Simple Connectivity: Connect to any audio source – stream from your phone, tablet, or computer. Compatible with music apps, YouTube, meditation guides, and more! Easy Maintenance: Includes a removable, machine-washable cover for lasting freshness and hygiene. Benefits Experience Life-Changing Benefits Regular use of vibroacoustic therapy has been associated with numerous potential wellness benefits: Deep Relaxation: Feel tension melt away as synchronized sound and vibration guide you to a state of profound calm. Stress & Anxiety Management: Many users report significant reductions in stress and anxiety levels after regular sessions. Enhanced Meditation: Deepen your mindfulness practice by anchoring awareness through physical sensation. Improved Sleep Quality: Create a perfect pre-sleep relaxation ritual that helps quiet the mind and prepare the body for restful sleep. Natural Pain Relief: The gentle vibrations may help ease discomfort by increasing circulation and releasing tension in affected areas. Discover why many users have made vibroacoustic therapy an essential part of their wellness routine. Your path to deeper relaxation, enhanced meditation, and natural stress relief begins with our Vibroacoustic Therapy Meditation Cushion Bundle. Note: While many users report therapeutic benefits from vibroacoustic therapy, individual experiences may vary. This product is not intended to diagnose, treat, cure, or prevent any disease. Consult with your healthcare provider before beginning any new wellness practice, especially if you have existing health conditions. How To Use Versatile Applications for Daily Wellness Incorporate vibroacoustic therapy into your daily routine in multiple ways: Morning Meditation: Start your day centered and focused. Midday Stress Relief: Take a quick break to reset and recharge. Evening Unwinding: Release the day's tension before bed. Yoga Enhancement: Add a new dimension to your yoga practice. Deep Listening: Experience music in an entirely new way as you feel every note and rhythm. Simple to Use, Profound to Experience No technical expertise required – our plug-and-play design makes setup effortless. Simply connect your audio source to the amplifier, adjust to your preferred intensity, and begin your journey into deep relaxation and healing. Use One amplifier with 2 cushions at the same time. The two cushion order will come with one amplifier, signal splitter to use for two cushions, headphone amplifier to use for two headphones, audio cables, two eye masks, two headphones and two cushions.

What is Vibroacoustic Therapy? Vibroacoustic Therapy uses low-frequency sound waves to create vibrations that are applied directly to the body. This cushion features built-in mini transducers that allow you to both hear and feel the music and sound frequencies during your meditation sessions. As you sit in your meditation pose, the Immersive Vibroacoustic Meditation Cushion will gently vibrate in sync with the music or natural sounds you're listening to. This synergy of sound and vibration creates a truly immersive sensory experience. Key Features: • Strategic placement of 2 tactile transducers designed to resonate with your body • Enhances focus and relaxation during meditation• Supportive design and durable construction for long-lasting comfort • Removable, machine-washable cover for easy maintenance • Suitable for floor use or in a recliner Benefits Benefits of Vibroacoustic Therapy: ✅ Deepens connection to the present moment ✅ Elevates sense of mindfulness ✅ Provides a unique sensory experience ✅ Supports extended meditation sessions ✅ Promotes overall relaxation and well-being Whether you're an experienced meditator or just beginning your practice, the Immersive Vibroacoustic Meditation Cushion can enhance your meditation experience. Elevate your practice with the power of Vibroacoustic Therapy. Experience a new dimension in meditation with our Vibroacoustic Meditation Cushion. Order now and transform your meditation sessions into a multi-sensory journey of relaxation and mindfulness, powered by the innovative approach of Vibroacoustic Therapy. What's Included Special Promotional Bundle including:  Meditation Cushion with Custom Amplifier Headphones Eye mask Use One amplifier with up to 4 cushions at the same time. The two cushion order will come with one amplifier, signal splitter to use for two cushions, signal splitter to use for two headphones, audio cables, two eye masks, two headphones and two cushions. The three cushion order will come with one amplifier, signal splitters to use for three cushions, headphone amplifier to use for three headphones, audio cables, three eye masks, three headphones and three cushions. The four cushion order will come with one amplifier, signal splitters to use for four cushions, headphone amplifier to use for four headphones, audio cables, four eye masks, four headphones and four cushions.